Categories
Materials

Material: Standard Matt White Permanent

Material: Standard Matt White Permanent

MaterialUncoated Woodfree Paper
Thickness56µ
Minimal Application Temperature+5ºC
Temperature Range-20 -> +80ºC
Compatibility– Inkjet
– Laser
– Copier
– Digital
– Litho
– Handwriting
WeightTotal – 150gsm

Face – 60/70gsm
Craft – 60/70gsm
Backing – 10/15gsm Allowable for adhesive and silicone
Material Quick Key Facts
Basis Weight70 g/m² ±4%ISO 536
Caliper 90 µm ±5ISO 534
Brightness ISO103% ±2ISO 2470-2
Whiteness CIE143% ±5ISO 11475
Opacity91% -2ISO 2471
Tensile Strength MD/CD≥3.2/≥1.9kN/mISO 1924-2
Material Face Stock

A matt white uncoated wood-free paper, with good opacity and excellent absorption, plus superior toner bonding characteristic. This label’s material is compatible and suitable for use with copier, inkjet and laser printers.
Adhesion (Peel 180° 20’/Stainless Steel)15.4 N/25mm ≥12.3FINAT FTM 1
Shear (1kg, in²/glass)100 min ≥60FINAT FTM 8
Tack10.3 N/25mm ≥12.3FINAT FTM 9 Glass
Min. Application Temp5° C
Service Temperature-20° C to 80° C
Material Performance Data (Typical Technical Values)
Basis Weight55 g/m² 52.5-57.5ISO 536
Caliper56 µm 52-60ISO 534
Tensile Strength MD/CD≥3.8/≥1.6kN/mISO 1924-2
Release Liner
A one side coated, bleached kraft paper.

Adhesive

Available with a general purpose permanent acrylic based, pressure sensitive adhesive. The adhesive is characterised by a high initial tack, excellent adhesion and good low temperature performance on a wide variety of substrates, including smooth and slightly rough, or curved surfaces. This adhesive should not be exposed to direct sunlight and/or high temperatures for long periods of time. Matt white face-stocks are also available with a removable and freezer grade adhesive.

Shelf Life

Two years from the date of manufacture under storage conditions as defined by FINAT (Federation Internationale des Fabricants et Transformateurs d’ Adhesifs et Thermocllants sur papiers et autres supports) 20° – 25° C and 40 – 50% RH.

WTPAAF001WTP
Known Material Codes

Application & Use

This face material is designed for the manufacture of labels on rolls and sheets for use in copier, inkjet, laser and thermal transfer printers (uncoated white only). The surface structure provides excellent toner bonding and print resolution.

This product is ideal for label applications where face stock appearance is less important such as address, instruction and inventory labels and many other applications. The uncoated face-stock provides limited resistance to moisture, temperature & chemicals.

Approvals

The face-stock complies with the RoHS guidelines on Electric & Electronic Equipment, the safety European directive 2009/48/CE. Contact with foodstuff (BfR XXXVI) and the Packaging & Packaging Waste Directive 94/62/CE.

The adhesive complies with the European food directives and legislation FDA 21; CFR 175, 105 and the German recommendations XIV as published by BfR (Bundesinstitut fur Risikobewertung) the German Federal Institute for Risk Assessment. Both of which state that the adhesive can be used in direct contact with dry, moist and non-fatty foodstuffs, however according to the FDA regulations the adhesive must be separated from the foodstuffs by a functional barrier. Also EN 71-3 and EN 71-9 for Toy Safety and the Packaging & Packaging Waste Directive 94/62/CE.

The release liner complies with the RoHS guidelines on Electric & Electronic Equipment, the safety European directive 2009/48/CE. Contact with foodstuff (BfR XXXVI). The Packaging & Packaging Waste Directive 94/62/CE and EN 71-3 and EN 71-9 for Toy Safety.